How To Use Satellite Finder App? Dish Antenna Using A Mobile Phone

You can adjust the satellite dish if it is mounted on a roof, balcony, or another elevated surface.

Never attempt to tune your dish antenna if it is in a hazardous area. Get professional help to align your dish antenna.

How To Use Satellite Finder App
apk life zone

First, make sure you have your smartphone with the iOS/Android operating system. Except for those who are reading this article on their mobile devices. Both operating systems include applications that allow you to adjust the satellite. You can also access satellite information via the websites of the relevant websites even if you don’t have a smartphone.

You can download the Android operating system here satellite director Google Play Application

How To Use Satellite Finder App? Align A Satellite Dish Antenna Using A Mobile Phone

If you don’t know the offset angle for your satellite dish, you can purchase a satellite signal finder similar to this one. Although you can make adjustments with the device, it is not as easy. This article explains how you can make adjustments without a device.

we discuss here How To Use Satellite Finder App?

You need to adjust your satellite dish

The orbit known as the Clarke belt (Geostationary orbit) is where communication satellites are located.

Technically, you will need three different numerical numbers to reach these satellites. The angle values below are used to determine dish orientation.

  • Horizontal rotation angle (AZIMUTH)
  • Vertical movement angle (ELEVATION).
  • LNB rotation angle (LNB POLARISATION)

Setting the horizontal angle for rotation (AZIMUTH setting).

Mobile phone apps are the best way to adjust horizontal rotation angles. Here is how to set it up for IOS.

You can run the dish align application. The program will automatically locate your location. You can correct the situation if your phone’s positioning settings are disabled or the program is not allowed to access your location information. Allow the program access to your location information.

After running the program, ensure that GPS signals are received outdoors for at least one minute. The program will calculate angle values based on your location. To adjust, click the satellite dish icon located in the upper left corner.

Click the compass icon at the bottom right after selecting your satellite. This screen will open in the following format. It will tell you which direction to rotate your dish horizontally.

As you can see, you can change the direction of your smartphone without moving too close. You can also fix your antenna by tightening the horizontal screws.

Adjusting the vertical direction (ELEVATION).

Dish align satellite director applications are not directly accessible. Adjust the vertical movement angle. These applications will give you the LNB polarization value and the vertical movement angle for the satellite that you select.

Two ways can you adjust the vertical angle of satellite dish’s satellite dish:

  1. Adjustment based on satellite angle values
  2. Using satellite signal finder device

Adjustment based on satellite angle values

Click the information to learn more about satellite information, click the icon in the lower right corner.

Based on your location, the satellite information has been calculated. This information is accessible by simply swiping on the screen.

The vertical angle of the dish should not exceed 40.75 degrees, according to me. Yours may be slightly different.

How can this dish angle be changed?

The dish antenna that you use will affect the calculation. An aerial antenna will be used. antenna your dish is perfectly round and your LNB is at its center, then your dish antenna needs to be adjusted so that it angles vertically at 40.75 degrees.

If you are interested in a dish is an off-axis dish anagramThis means that if your dish has a slightly egg-shaped shape and the LNB position is shifted, you should first know the offset angle value. This type of antenna is also known as offset antenna.

The dish offset angle can vary depending on the manufacturer of the dish and the size of the dish. This value is usually between 18 and 30 degrees. You can easily measure the dish’s vertical dimension using the brand name on the dish antenna. You can also call the manufacturer to inquire if it’s not listed on their site.

Every offset angle for a 70 cm dish may be different. You should not try to match your dish with a 70 cm dish you find on the internet. Asking the company is the best way to find out.

Okay, now we know that the dish offset angle value for our dish is 26 degrees.

What now? What is the value of this offset angle?

The figure below shows that the offset angle value refers to the angle created by the surface so that signals from satellites can reach the LNB through reflection from the dish. This means that if you place your satellite dish 90 degrees perpendicular to the ground, you will have a 26-degree vertical angle of motion adjustment.

To calculate the vertical angle of movement for my satellite dish, the offset angle value must now be subtracted from 40.75deg. Let’s say that 40.75 – 26 equals 14.75deg. This means that I must make upward 14.75deg vertical movement. For Turksat, this will result in my dish position being as follows.

I can give you the 14.75-degree angle. (You will find the degree) Using the protractor or the angle value on your bowl, or according to the angle value. A satellite signal finder is a good option if the angle problem is difficult for you.

A satellite signal finder device is the best tool to adjust the vertical if you can’t find the offset angle for your satellite dish. Before you begin the adjustment, ensure that the horizontal angle is corrected with less than 1% error.

The satellite signal finder mentioned earlier only indicates the signal level. This information is sufficient to make adjustments. The most important thing you should do before using the device is to adjust the horizontal angle.

Most devices come with an antenna cable of a short length. You should not exceed 30 cm for the length of this antenna cable. Two F-type connectors are required and several antenna cables are necessary.

As shown in the figure, the signal finder device should connect between the LNB (the television) and the LNB (the TV). The short antenna cable should be connected to the LNB. LNB and receiver should be connected to the right side of the signal finder device.

Your antenna may not detect signals if DiSEqC was used before. You will be able to use it with DiSEqC. (DiSEqC refers to a circuit element that joins antenna cables from multiple directions.

After making the connections, turn on the TV. The signal finder device will get the energy it needs to function from the TV.

The button on your sat finder should be adjusted so that the needle of the satellite signal finder device is in its middle. You should adjust the pot to hear a low, flat, and high-pitched sound. You cannot adjust the setting if you don’t hear the sound or have maximum volume.

Your dish should be moved upwards at 1-degree angles. You can move your dish upwards at 1-degree angles if the signal becomes stronger. You can adjust the dish position by moving the pointer up and down. The horizontal angle of rotation may not be adjusted to its full extent. Adjust your dish if there is a slight increase in signal volume.

How to adjust LNB skew angle adjustment for LNB Polarization

Your cheap satellite signal finder device does not detect LNB skew angles changing. The LNB skew angles vary depending on the satellite that you choose in the Clarke belt. This includes the AZIMUTH or ELEVATION values and the geographical region where you are located. Learn the LNB skew angle value using your mobile device app.

The dish antenna’s LNB connection socket is a disadvantage. However, it is relative to the LNB skew angle when you view the dish antenna from the front. As negative (-), values increase clockwise, the rotation speed increases! Counterclockwise rotation increases with positive (+). values.

The Turksat mobile phone app gives a value of -13 degrees. I need to adjust the angle by turning the LNB clockwise at 13 degrees. The LNB has an indicator that indicates the angle values. It is also easier to adjust the angle. LNB skew angle adjustment can be done independently of horizontal and vertical adjustments. You can adjust the LNB setting prior to other settings.

 

Leave a Comment